Commercial Vehicle Wraps & Fleet Graphics near Seattle

A vehicle wrap is a high-quality, digitally printed vinyl film that is applied to the exterior of a vehicle, covering its original paintwork. It can be customized with graphics, logos, and designs to create a unique and eye-catching appearance for advertising, branding, or personalization purposes.

A professionally installed printed wrap lasts up to 8 years on vertical surfaces like doors and sides, depending on the film and inks used. Horizontal surfaces such as hoods and roofs get more sun and typically last about 3 years. Hand washing and parking out of direct sun extend the life of a wrap.

Yes, vehicle wraps can be removed without causing damage to the original paintwork, provided that the wrap was professionally installed and the paint underneath is in good condition. It is recommended to have a professional remove the wrap to ensure the best results.

A vehicle wrap can provide a layer of protection for the original paint from minor scratches, UV exposure, and other environmental factors. However, it is not a substitute for proper paint protection products, such as clear coats or ceramic coatings.

Yes, you can wrap a leased vehicle as long as the wrap is removable and doesn't cause any damage to the original paint. It's always a good idea to check with your leasing company for any specific requirements or restrictions before proceeding with a wrap.

The time it takes to install a vehicle wrap depends on the size and complexity of the project. Generally, it can take anywhere from 1 to 5 days for a full wrap installation, with additional time required for more intricate designs or larger vehicles.

Most parts of a vehicle can be wrapped, including the hood, roof, doors, windows (using perforated window film), and bumpers. However, some surfaces or areas with complex curves and contours may be more challenging to wrap and may require special techniques or materials.

At Ardor Printing, a full pickup truck wrap costs $4,000 to $5,900 and a partial wrap costs $2,500 to $3,100. Spot graphics start at $615, and simple lettering and logos start at $350. Van and box truck wraps are priced by size and roof height. Price also depends on design, coverage and extras like chrome or canopies. See the vehicle wrap cost section above, or request a free quote.

Yes, you can design your own vehicle wrap, provided that you have the necessary design software and skills. However, it's recommended to work with a professional designer or wrap company to ensure that your design meets the technical requirements for printing and installation, and that it effectively communicates your message or branding.

Hand wash your wrap or use a touchless car wash only, and wait 72 hours after installation before the first wash. Avoid brush car washes, pressure washing close to edges and harsh chemicals. Following 3M care guidelines keeps the colors bright and the film lasting as long as possible.

A full wrap covers every painted surface of the vehicle with printed vinyl. A partial wrap covers about 50% of the vehicle and blends graphics into the existing paint color. Partial wraps cost less, from $2,500 on trucks, and still look like a complete design. Plastic handles, mirrors and bumpers are normally left unwrapped on both.

Yes. We wrap commercial vans (Ford Transit, Mercedes Sprinter and Metris, Ram ProMaster, Chevy Express, Nissan NV200), pickups, box trucks, service bodies and semi trucks. We handle fleets of every size, including a 100+ vehicle rebrand for Greenwood Heating, and keep branding matched across every vehicle.

Ardor Printing is a 3M Certified Graphics Installation Company and UASG Certified. We print and laminate wraps with premium cast films from 3M and Avery Dennison, and use 3M reflective films for reflective graphics.

Van wraps are priced by van size and roof height. Compact vans like the Transit Connect, ProMaster City, NV200 and Metris cost the least, followed by low-roof Transit, ProMaster and Express vans, then medium and high-roof Transit, Sprinter and ProMaster vans. Partial van wraps and lettering are lower-cost options. Send us your year, make and model for an exact quote.

Our shop is at 12531 Old Snohomish Monroe Rd. in Snohomish, WA 98290. We serve businesses throughout Snohomish County and the greater Seattle area, including Everett, Lynnwood, Bothell, Mill Creek, Marysville, Lake Stevens, Monroe, Mukilteo, Edmonds, Shoreline, Woodinville, Kirkland, Bellevue and Seattle. Call (425) 629-0796 for a quote.