Vinyl Banner Sizes, Finishing Options and What They Cost
Custom 13 oz vinyl banners start at $60.00 at Ardor Printing. See the 32 listed sizes, grommets and pole pockets, single and double sided printing, and when mesh is the better pick.

On this page
Quick answer: At Ardor Printing in Snohomish, WA, a custom 13 oz vinyl banner starts at $60.00 for a 4 ft x 2 ft banner. We list 32 sizes from 4 ft x 2 ft up to 30 ft x 5 ft, printed on one side or two, and every banner is hemmed on all sides with grommets or pole pockets. You can size and price yours in our online banner builder.
Need a size that is not listed or a bulk price? Request a quote and we'll price it by hand.
Key takeaways
- Starting price: 13 oz vinyl banners start at $60.00 for a 4 ft x 2 ft banner.
- Sizes: 32 listed sizes, 2 to 5 ft tall and 4 to 30 ft wide, or any size up to 10 ft x 100 ft in the builder. The largest listed size, 30 ft x 5 ft, is $539.00.
- Finishing: hems on all sides, then grommets or pole pockets. Webbing, rope, wind slits and reinforced corners are add-ons.
- Materials: 13 oz vinyl is our most popular. 18 oz blockout vinyl and mesh cover heavier and windier jobs.
How much does a custom vinyl banner cost?
A custom 13 oz vinyl banner from Ardor Printing starts at $60.00 for a 4 ft x 2 ft banner. Banners are priced by the square foot, so the price moves with the height and width you pick. In the banner builder you enter your size, choose a material and finishing, and the price for your exact banner shows before you order. The table lists the Ardor Printing price for ten sizes in 13 oz vinyl, printed on one side, as the builder shows them.
| Banner size (width x height) | Ardor Printing price |
|---|---|
| 4 ft x 2 ft | $60.00 |
| 6 ft x 2 ft | $64.00 |
| 8 ft x 2 ft | $77.00 |
| 6 ft x 3 ft | $84.00 |
| 8 ft x 3 ft | $104.00 |
| 8 ft x 4 ft | $130.00 |
| 10 ft x 4 ft | $156.00 |
| 10 ft x 5 ft | $212.00 |
| 20 ft x 4 ft | $287.00 |
| 30 ft x 5 ft | $539.00 |

What sizes do vinyl banners come in?
Our 13 oz vinyl banner page lists 32 sizes, from 4 ft x 2 ft up to 30 ft x 5 ft (width x height).
If your space needs something else, the builder takes any width and height in feet, from 1 ft on each side up to 10 ft on the short side and 100 ft long in one piece. For anything bigger than that, request a quote.
Where can I get a 2x6 banner printed?
A 2 ft x 6 ft banner is one of the 32 sizes we list for 13 oz vinyl and for mesh, and at Ardor Printing it is $64.00 in 13 oz vinyl. Pick that size on the product page and click Add to Designer, and the designer opens with that exact choice already selected.
Banners are printed at Ardor Printing in Snohomish, WA. You can pick yours up free at 12531 Old Snohomish Monroe Rd or have it shipped free anywhere in the US.
What are the best materials for durable vinyl banners?
It depends on where the banner hangs and how long it stays up:
- 13 oz vinyl: our most popular banner material, for indoor and outdoor use. It suits storefronts, events, fences and sales.
- 18 oz blockout vinyl: our heaviest, most durable vinyl banner, with a blockout layer between two vinyl faces so nothing shows through. It is made for street banners, light pole banners, building banners and long-term outdoor use. See the 18 oz blockout banner.
- Mesh: perforated vinyl that lets the wind pass through, for fences and other windy spots.
The builder also offers 9 oz fabric, blockout fabric, tension fabric, indoor smooth vinyl and backlit vinyl for lightboxes. All of them are matte. You can see the full range in our vinyl banners collection.
Grommets or pole pockets: which finishing do you need?
Every banner is hemmed on all sides. From there you choose how it hangs:
- Grommets: every 2 ft on all sides, on the top and bottom only, or on the left and right only. You can also choose the 4 corners only, or none.
- Pole pockets: 2 in, 3 in or 4 in pockets, on the top only or on the top and bottom. Pole pockets replace grommets and rope.
- Add-ons: webbing and D-rings, rope, wind slits and reinforced corners.
Grommets suit a banner that is tied or zip-tied to a fence, wall or frame. Pole pockets suit a banner that slides onto a pole or rod.
Should you order a single sided or double sided banner?
Banners can be printed on 1 side or 2 sides. Single sided is the usual choice for a banner mounted against a wall or fence, where only the front is seen. Double sided makes sense when people pass on both sides, for example a banner hung from a ceiling, pole or street post.
For a double sided banner, 18 oz blockout vinyl is printed front and back, and its blockout layer keeps one side from showing through the other.
When is a mesh banner the better choice?
A mesh banner is perforated vinyl that lets the wind pass through, so it hangs flat on fences, construction sites, scaffolding, stadiums and other windy spots. Our mesh banner page lists the same 32 sizes as 13 oz vinyl, with hems and grommets included free.
Solid vinyl shows brighter color, so use it where wind is not a problem. Our guide to mesh banners vs. vinyl banners compares the two side by side.
How do you order a custom banner from Ardor Printing?
Pick a listed size or enter your own in the builder, then choose your material, printed sides and finishing. Upload your file, paste a link to your artwork, or choose "Email me the proof to approve". You see your banner in 3D with your price and sign your proof before checkout, and we print exactly what you approve.
For Seattle-area orders, see our page on banner printing in Seattle.
If you are near Everett, our banner printing in Everett, WA page explains free pickup at our Snohomish shop, a short drive from downtown Everett.
How long does a vinyl banner order take?
Ardor Printing's banner builder page states: "Most vinyl banners are ready in 1 to 3 business days after you approve your proof."
Get a banner quote
Need a size that is not listed, a bulk price or design help? Request a quote or call (425) 629-0796, and Ardor Printing in Snohomish, WA will price it for you.
About the author: Dayne Remlinger founded Ardor Printing in 2012. His team has completed more than 25,000 projects from its shop at 12531 Old Snohomish Monroe Rd, Snohomish, WA 98290.
Ready to talk about your project?
Ardor Printing designs, prints and installs vehicle wraps, signs and wall graphics in-house in Snohomish, WA, for businesses from Everett to Seattle.



Questions or comments?