Row of Greenwood Heating Ford Transit vans with matching green fleet wraps by Ardor Printing

A buyer's guide · Vans, trucks & trailers

Fleet Wrap Buyer's Guide: Cost, Rollout and What to Ask

What a fleet wrap costs, how a rollout runs without parking your vehicles, how long the wraps last and what to ask before you sign. From Ardor Printing in Snohomish, which has branded 7,000+ vehicles since 2012 and installs across the Puget Sound.

  • From $3,500 per vehicle
  • One design across every vehicle
  • In-house design, print & install
  • Since 2012 7,000+ vehicles branded

Who this buyer's guide is for

This buyer's guide is for business owners and fleet managers who are pricing a first fleet wrap, planning a rebrand, or adding vehicles to a fleet that is already wrapped. A fleet wrap puts the same printed vinyl graphics on every vehicle in your company fleet, so each van, truck and trailer carries one brand. We design, print and install commercial fleet wraps in-house at our shop in Snohomish, Washington, and we've branded more than 7,000 vehicles since 2012. The cards below give our starting prices and price ranges for each level of coverage.

Door logosYour logo on both front doors, from $350 (cars, trucks and vans)
Door lettering packageLogo plus phone, website and USDOT number, from $495
Larger spot graphicsFrom $615
Partial wrapPrinted graphics on part of the vehicle, blended into the paint color, from $2,500
Full wrapCars from $3,000; pickups $4,000 to $5,900; vans $3,900 to $7,000; box trucks $4,500 to $8,500+; trailers $1,500 to $5,500
DesignQuoted separately: from $650 for a partial wrap and from $1,000 for a full wrap

What counts as a fleet wrap?

Fleet work is not only full wraps. You can mix coverage levels: full wraps on the vehicles customers see most, partial wraps or lettering on the rest. Whatever the mix, commercial fleet graphics only work when every vehicle matches.

This guide covers what it costs, how a rollout runs without parking your vehicles, how long the wraps last and what to ask a wrap shop before you sign. Near Seattle and ready for a quote? See fleet vehicle wraps in Seattle. By vehicle type, see van wraps, truck wraps, box truck wraps and trailer wraps.

Coverage levels, from lettering to full wraps

White Chevy Silverado fleet truck with UMC door logos and tailgate lettering

Door logos & lettering

The low-cost way to put your name on every vehicle. Door logos on both front doors start at $350, and a door lettering package with your logo, phone, website and USDOT number starts at $495.

Shown: UMC

Three white Ford Transit vans with matching blue Wave partial wrap graphics

Partial wraps

Printed graphics on part of each vehicle, blended into the paint color. Partial wraps start at $2,500.

Shown: Wave

Titan Roofing Ford Transit van with a full printed wrap

Full wraps

Full coverage in printed film. Vans run $3,900 to $7,000, pickups $4,000 to $5,900 and box trucks $4,500 to $8,500+.

Shown: Titan Roofing. Read the Titan Roofing case study.

How much does it cost to wrap a fleet?

Our fleet pricing starts from $3,500 per vehicle. That starting price fits partial wraps, or large fleets of smaller vehicles. Full wraps on vans and trucks cost more, as the ranges above show. Wrap design is quoted separately, from $650 for a partial wrap and from $1,000 for a full wrap, and on a fleet the master design is created once. Branding several vehicles? Ask us about fleet pricing.

For per-vehicle pricing in more detail, read how much fleet wraps cost, or run your own numbers in our vehicle wrap pricing and ROI calculator.

Design starts once your deposit is in, and print projects need a 50% deposit before printing or scheduling.

Financing is available: when we send your invoice, you can apply to pay over time through Affirm (subject to approval). We also accept card and bank transfer.

The six steps of a fleet rollout

  1. Vehicle list

    We start with a list of every vehicle: year, make and model, plus anything that changes the layout, such as ladder racks, toolboxes and old graphics that need to come off. You get one quote for the whole fleet.

  2. One master design

    Our designers build one master design, then fit it to each body style, so your logo, phone number and website sit in the same place on every vehicle.

  3. A proof for every vehicle

    Before anything prints, you approve a proof for each vehicle.

  4. Printed in one shop

    We print every panel in our own shop in Snohomish, which keeps colors matched from the first van to the last. If a print doesn't match the proof you approved, we reprint it free.

  5. Installed in batches

    We take a few vehicles at a time so the rest of the fleet keeps working. Installs happen at our shop or on-site at your yard or lot, and we can pick up vehicles and bring them back when they're done.

  6. Files kept for the next vehicle

    Your signed proofs and artwork stay on file. When you add a truck, we adapt the same design to it.

How fast can a fleet be wrapped?

Greenwood Heating rebranded more than 100 Ford Transit vans with us in two months, without disrupting their business. See the Greenwood Heating fleet rebrand, or read how to plan a fleet rebrand of 100 or more vehicles.

Do fleet vehicle wraps pay off?

Across 194 fleets we've branded, companies grew revenue by an average of 25% in the 6 months after their wrap. A wrap is also a one-time cost: once it is on, it works every day the vehicle is on the road, with no monthly ad bill.

How long do the wraps last?

A printed wrap lasts up to 8 years on vertical surfaces like doors and sides. Hoods and roofs get more sun and last about 3 years. Care is simple: hand wash or use a touchless car wash only, and wait 72 hours after install before the first wash.

Every install has a 1-year installation warranty. If something comes up, a field installer reviews it and gives you a solution within 24 hours at no cost. Film defects are covered by the 3M and Avery Dennison warranties. If a panel gets damaged, we can repair the wrap by re-wrapping that panel or section.

When a vehicle leaves the fleet, the wrap comes off without damaging the paint underneath, when the paint is in good condition and the wrap is removed following 3M's guidelines. We remove old wraps and old graphics, and wrap removal starts at $500.

What to ask a fleet wrap company

  • Who installs? Ask whether the shop's own installers do the work. Ours are 3M and UASG certified.
  • Who prints? One shop that designs, prints and installs keeps graphics consistent from one vehicle to the next.
  • How will you limit downtime? Look for batch scheduling, pick-up and delivery, and on-site installs.
  • Do you keep our files? You will add and replace vehicles. The design should be ready when you do.
  • What does the warranty cover? Get it in writing. Ours is on our warranty page.
  • Who is our contact? With us, one project manager is your point of contact from quote to install.

Where we wrap fleets

Our own crew installs across the Puget Sound, and beyond Washington our nationwide installer network can facilitate installs in every state.

We've also branded fleets and spaces outside Washington, including fleets for Alaska Airlines, Leavitt Machinery and Kawanti Adventures in Ketchikan, Alaska, Google office spaces in Denver and San Francisco, and FlyOver Las Vegas.

Keep reading

What do customers say about Ardor Printing?

5.0 248 Google reviews
★★★★★
“Every wrap they’ve done for us has lasted a long time and paid for itself very quickly! Can’t recommend them more.”
Jonathan G. · Google review
★★★★★
“Ardor was very professional and responsive. They worked with us until the graphics were exactly the way we wanted them. Installation was quick and look great.”
EcoTreeNW Inc · Google review
★★★★★
“Took them my concept, provided a sample graphic and color and in short order had it mocked up and sent me pictures of samples. So very quick and easy!”
wabuchanan · Google review
★★★★★
“Ardor Signs has been very easy to work with. the staff is always accomodating and efficient. We certainly would recommend them.”
Cascade Bickford · Google review

Fleet wrap questions

How much does it cost to wrap a fleet?

At Ardor Printing, fleet pricing starts from $3,500 per vehicle, which fits partial wraps or large fleets of smaller vehicles. Full wraps run $3,900 to $7,000 for vans, $4,000 to $5,900 for pickups and $4,500 to $8,500+ for box trucks. Design is quoted separately.

Can you wrap our fleet without taking every vehicle off the road?

Yes. We schedule a few vehicles at a time so the rest of your fleet keeps working. We can pick up your vehicles and bring them back, or install on-site at your yard or lot.

What happens when we add a vehicle later?

We keep your signed proofs and artwork on file, so when you add a truck we adapt the same design to it, and color-managed printing keeps the colors matched.

Do you install outside Washington?

Our own crew installs across the Puget Sound. Beyond Washington, our nationwide installer network can facilitate installs in every state.

Will a wrap damage the paint?

No, when the paint is in good condition and the wrap is removed following 3M's guidelines.

Get a fleet wrap quote

Tell us how many vehicles you have, what kind, and your timeline. Quotes are free, and we reply to every quote request within 1 business day.

  • Your vehicle list, with the year, make and model of each
  • How many vehicles, and which ones you want done first
  • Your logo and brand colors
  • Your timeline, or any deadline

Prefer to talk? Call (425) 629-0796 · Mon–Fri 7am–5pm

Request your free quote